Polyurethane Door Stop Line
Polyurethane belongs to a group of plastics that combines characteristics of elastomer with the possibility of transformation, due to the wide variation of hardnesses possible to establish in its formulation
We present you our innovative products exclusively developed by SUMER PLÁSTICOS
LINHA DE PRODUTOS EM POLIURETANO,
Polyurethane belongs to a group of plastics that combines characteristics of elastomer with the possibility of transformation, due to the wide variation of hardnesses possible to establish in its formulation
We present you our innovative products exclusively developed by SUMER PLÁSTICOS
, plásticos junta facil cantoneira ferramentas reciclados cantoneiras pvc cantoneiras plásticas cantoneira plástica para azulejoBAT-MACA IN PU
The first polyurethane batter in Brazil, extremely light, resistant, antifungal, antibacterial, solid product, non-caruncha product, does not drip. Extremely simple and fast installation.
...The first polyurethane batter in Brazil, extremely light, resistant, antifungal, antibacterial, solid product, non-caruncha product, does not drip. Extremely simple and fast installation.
DIMENSIONS
200 mm x 15 mm x 2,000 mm
BENEFITS:
BASE-MACA SUMER PLASTICS are massive, there are no internal air pockets as in the PVC bag, the PVC bag can absorb contaminants that settle in the internal hollow ducts, which can be continuous contaminant foci in the environment.
· Lightness;
· Natural weathering (withstands all kinds of weather such as heat, rain and humidity, without mocking, rusting, or rotting);
· Perfect finish (accepts paint, acrylic mass, can be sanded, rectified, dug, as well as wood);
· It is non-toxic;
· Does not propagate flame;
· Does not warp or bend;
· Easy fixing and installation;
· No termite attack;
· Total ergonomics.
INSTALLATION MODES:
a) Using the glue for BATE-MACA in PU Sumer Plásticos®:
The square of the wall where the batter will be installed should be flush with the perfect horizontal line for BATE-MACA gluing.
b) Surface Preparation: Remove any dust, grease or grease stains, mold, loose parts and leave the substrate free from any impregnation that could impair the adhesion of the product to the substrate. If necessary, sand and wash the surface to leave it firm.
c) Application: Using an application gun, apply the glue on the BATE-MACA in the shape of a string at the points that will have adhesion with the wall. Press the stop on the wall until the desired leveling is achieved.
d) Fixing: pass the glue on the back of the plate and press for 60 seconds against the wall, if necessary use some type of anchor for fixing. If necessary use screws every 1 meter. If there are small gaps between the batter and the wall, use the adhesive glue to caulk this gap.
e) Drying: Adjustment time: 10 minutes; total curing time: 24h porous materials and 48h non-porous materials (25 ° C and 60% URA).